Date   

Re: Black cat Cougar

Lesa Duncan
 

black cat cougars do run Make the cut I use one with it.


On Sat, Oct 24, 2020 at 8:56 PM Kathy Kelley via groups.io <neeka2u=yahoo.com@groups.io> wrote:
Hi Sue,

I think that the machine will run with MTC, correct me if I'm wrong.  That is the only cutting software I use, and I love it!  What is the machine size, please.  I am prepared to pay the shipping to get it here and yes, I'm sure it will be very expensive.  I hope that it will work out.

Thank you so much for your response,

Hugs,

Kathy



On Friday, October 23, 2020, 3:08:32 PM PDT, Susan via groups.io <sueb_4=yahoo.com@groups.io> wrote:


I can find out for you on Monday. I imagine that it will be fairly expensive. 

cheers sue


Re: Cricut Foil Transfer Kit

Liz Ackerman
 

This is good news, Julie! Kudos to you and your testing!!
 
Liz
 

From: Julie Flanagan
Sent: Sunday, October 25, 2020 5:44 PM
To: main@MTC-Tuts.groups.io
Subject: [Special] [MTC-Tuts] Cricut Foil Transfer Kit
 
I don't remember who asked if this kit will work on machines other than the Cricut Explore and Maker. I received my kit, and tried it out a bit today.

Yes, I got it to work with my Pazzles Vue, and my Cricut Expression with a special hack. The tool is too small, so I slit a rubber pencil grip lengthwise, and cut off about 1/2 inch of the length. I slid this piece of rubber around the tool. I placed this in the blade holder cradle using the Pazzles pen tool spacer to get the height just right. Pressing down hard on the tool against the spacer, I tightened the belt around the tool as tight as it would go.

On the Cricut Expression, I set it to maximum pressure, minimum speed, with multi-cut on. This worked perfectly with the two tips that I tried. (the third tip took a leap out of the package when I opened it, and it is nowhere to be found.)
On the Pazzles Vue, I used the same rubber pencil grip, sliced down the long way, and trimmed 1/2" off the end. It loaded the same way as in the Cricut Expression. I used a pressure of 35, and set the tool to engrave. Speed 2 worked well.
I have not tried it on my Maker or Explore yet, but I assume it will work with the recommended Cricut Settings.

I haven't tried it on my other cutters, but am sure that it will work well with the BossKut Gazelle and the KNK Zing, since their clamps hold any size tools.

I have not tried it in my Cameo, but assume that it will not work in Cameo, as it would require more pressure than the standard tool holder provides. If you have tried it in a Cameo, please share your results.

If you have tried it with other machines, please share your results with us.

You can check out this new tool here:  Cricut Foil Transfer Kit

Thanks,
Julie

Virus-free. www.avg.com


Cricut Foil Transfer Kit

Julie Flanagan
 

I don't remember who asked if this kit will work on machines other than the Cricut Explore and Maker. I received my kit, and tried it out a bit today.

Yes, I got it to work with my Pazzles Vue, and my Cricut Expression with a special hack. The tool is too small, so I slit a rubber pencil grip lengthwise, and cut off about 1/2 inch of the length. I slid this piece of rubber around the tool. I placed this in the blade holder cradle using the Pazzles pen tool spacer to get the height just right. Pressing down hard on the tool against the spacer, I tightened the belt around the tool as tight as it would go.

On the Cricut Expression, I set it to maximum pressure, minimum speed, with multi-cut on. This worked perfectly with the two tips that I tried. (the third tip took a leap out of the package when I opened it, and it is nowhere to be found.)
On the Pazzles Vue, I used the same rubber pencil grip, sliced down the long way, and trimmed 1/2" off the end. It loaded the same way as in the Cricut Expression. I used a pressure of 35, and set the tool to engrave. Speed 2 worked well.
I have not tried it on my Maker or Explore yet, but I assume it will work with the recommended Cricut Settings.

I haven't tried it on my other cutters, but am sure that it will work well with the BossKut Gazelle and the KNK Zing, since their clamps hold any size tools.

I have not tried it in my Cameo, but assume that it will not work in Cameo, as it would require more pressure than the standard tool holder provides. If you have tried it in a Cameo, please share your results.

If you have tried it with other machines, please share your results with us.

You can check out this new tool here:  Cricut Foil Transfer Kit

Thanks,
Julie


Re: Black cat Cougar

Kathy Kelley
 

Hi Sue,

I think that the machine will run with MTC, correct me if I'm wrong.  That is the only cutting software I use, and I love it!  What is the machine size, please.  I am prepared to pay the shipping to get it here and yes, I'm sure it will be very expensive.  I hope that it will work out.

Thank you so much for your response,

Hugs,

Kathy



On Friday, October 23, 2020, 3:08:32 PM PDT, Susan via groups.io <sueb_4@...> wrote:


I can find out for you on Monday. I imagine that it will be fairly expensive. 

cheers sue


Re: Black cat Cougar

Susan
 

I can find out for you on Monday. I imagine that it will be fairly expensive. 

cheers sue


Re: MTC_Tuts Archives

Julie Flanagan
 

I sent the link again for the archive to your gmail address. 

Thanks,

Julie


Re: Black cat Cougar

Kathy Kelley
 

I would love to adopt your machine!  Do you have an idea what the shipping cost would be to Washington State, USA?

Kathy

P.S. I have the original Zing and no other machine.

On Thursday, October 22, 2020, 6:21:38 PM PDT, Susan via groups.io <sueb_4@...> wrote:


Hi all.  I live on the East coast Australia & own a Black Cat Cougar which I no longer have a use for.  It is in mint condition, hardly used.  I paid a lot for it but am willing to give it to someone who can use it.


A little late... but just the same :o)

ItsMeSB
 

Hi all…

I’m a little behind and my note is probably no longer useful L… But please remember to send your Paypal donation to Julie as a “friend” so she doesn’t have to pay a fee when your donation is received. The option is available after entering the amount you’d like to send (after you’ve entered her email address). If your payment option is “paying for an item or service” you can click the Change link and will be given a new option of “sending to a friend.”

Thanks Julie!

Sharon in Iowa


Re: MTC_Tuts Archives

lukenessling@...
 

Hi Julie,

I got the correct email addy and sent a contribution.  I see you said archive sent but I did not receive anything.  Was it sent to correct email addy?  lukenessling@...

Thanks,
Kelly


On Oct 21, 2020, at 4:48 PM, Julie Flanagan <craftymusician@...> wrote:

Archive sent. Thanks!

Julie
julieflanagan1 @ juno.com


Black cat Cougar

Susan
 

Hi all.  I live on the East coast Australia & own a Black Cat Cougar which I no longer have a use for.  It is in mint condition, hardly used.  I paid a lot for it but am willing to give it to someone who can use it.


Re: MTC_Tuts Archives

Julie Flanagan
 

Archive sent. Thanks!

Julie
julieflanagan1 @ juno.com


Re: MTC_Tuts Archives

Xsbum
 

Hi Julie-

Just wanted to let you know I sent a request to your other email to request julieflanagan@... for the PCS_tuts. Archive as well.

Thanks,
Jacki

On Tuesday, October 13, 2020, 11:19:53 AM PDT, Julie Flanagan <craftymusician@...> wrote:


Thanks so much for those of you who have been able to contribute towards the MTC_Tuts Archives. Just a reminder to put the link I sent you in a special place so that in the event of a computer crash or new computer, etc, you can go back to my drop box and get the archives again. I just added some more surprise content, so if you downloaded the archived files in the past few days, be sure to go back again to get one more zipped file. Instructions for using it are included in the collection. 

If you have not made a contribution, you may still do so. 

Some have asked about the Popup Card Studio Tutorials archive. There are many zipped popup card designs that include SVG files available here: https://groups.io/g/PCS-Tuts/files/Shared%20Popup%20Files  These are free downloads. Last year 24 people contributed towards transferring the Shared Files from the PCS_Tuts Yahoo group to groups.io  I was able to archive all of the tutorials, photos, files, and shared files from that group and post the archive in my Drop Box. If you would like to download that PCS_Tuts Archive, you can send a contribution of any amount to me via paypal: julieflanagan @ juno . com (leave out the spaces), and I will send you the link for it.  

I have been sending links to the email addresses provided by PayPal. If you need your archive sent to a different email address, please be sure to include that in a note when you make your contribution. Also let me know which archive you need: MTC_Tuts, MTC_Tuts Old, or PCS_Tuts. 

The MTC_Tuts_Old archive includes tutorials created for versions of MTC prior to version 4.1.0.  

Let me know if you have further questions about these archives.

Thanks again for your support! 

Julie


Re: MTC_Tuts Archives

Julie Flanagan
 

To donate, go to Paypal, and send a payment to
julieflanagan1 @ juno . com (remove the spaces).

Thanks,
Julie

On 10/13/2020 4:41 PM Dee Kortan <deek@...> wrote:



Julie,

Thank you for all you do!  

I don't do much crafting, I never really took advantage of all that MTC can do.  I'm just mainly do simple cuts.   I would like to still donate again, but I can't remember how?

I was wondering if you could explain why some of my MTC files will not let me change them to svgs?  I was able to do some, but not others.


Thank you again for all you do and have done.

Dee

On Tuesday, October 13, 2020, 01:19:55 PM CDT, Julie Flanagan <craftymusician@...> wrote:


Thanks so much for those of you who have been able to contribute towards the MTC_Tuts Archives. Just a reminder to put the link I sent you in a special place so that in the event of a computer crash or new computer, etc, you can go back to my drop box and get the archives again. I just added some more surprise content, so if you downloaded the archived files in the past few days, be sure to go back again to get one more zipped file. Instructions for using it are included in the collection. 

If you have not made a contribution, you may still do so. 

Some have asked about the Popup Card Studio Tutorials archive. There are many zipped popup card designs that include SVG files available here:  https://groups.io/g/PCS-Tuts/files/Shared%20Popup%20Files  These are free downloads. Last year 24 people contributed towards transferring the Shared Files from the PCS_Tuts Yahoo group to groups.io  I was able to archive all of the tutorials, photos, files, and shared files from that group and post the archive in my Drop Box. If you would like to download that PCS_Tuts Archive, you can send a contribution of any amount to me via paypal: julieflanagan @ juno . com (leave out the spaces), and I will send you the link for it.  

I have been sending links to the email addresses provided by PayPal. If you need your archive sent to a different email address, please be sure to include that in a note when you make your contribution. Also let me know which archive you need: MTC_Tuts, MTC_Tuts Old, or PCS_Tuts. 

The MTC_Tuts_Old archive includes tutorials created for versions of MTC prior to version 4.1.0.  

Let me know if you have further questions about these archives.

Thanks again for your support! 

Julie


Re: MTC_Tuts Archives

Julie Flanagan
 

I have never had an issue exporting my MTC files to SVG. There are many files shared by Dave in the MTC Gallery that had all of the images locked to keep all the pieces in place. These were mostly free coloring book pages that he filled in with colored pieces. There is a Gold Lock icon in the lower right corner of the MTC screen. Click on that and select Unlock All. Then you will be able to select all (Ctrl+A), and Export as SVG (Ctrl+Shift+S).

If there are pictures included in the file, some programs will not import those SVG files due to the picture.I love that Pazzles InVue software will import the SVG files that include pictures. But Cricut Design Space, Scan N Cut, and SCAL may not import them. In that case, I export the pictures separately, delete the pictures, then select the remainder of the design to export as SVG. 

Julie

On 10/13/2020 4:41 PM Dee Kortan <deek@...> wrote:



Julie,

Thank you for all you do!  

I don't do much crafting, I never really took advantage of all that MTC can do.  I'm just mainly do simple cuts.   I would like to still donate again, but I can't remember how?

I was wondering if you could explain why some of my MTC files will not let me change them to svgs?  I was able to do some, but not others.


Thank you again for all you do and have done.

Dee

On Tuesday, October 13, 2020, 01:19:55 PM CDT, Julie Flanagan <craftymusician@...> wrote:


Thanks so much for those of you who have been able to contribute towards the MTC_Tuts Archives. Just a reminder to put the link I sent you in a special place so that in the event of a computer crash or new computer, etc, you can go back to my drop box and get the archives again. I just added some more surprise content, so if you downloaded the archived files in the past few days, be sure to go back again to get one more zipped file. Instructions for using it are included in the collection. 

If you have not made a contribution, you may still do so. 

Some have asked about the Popup Card Studio Tutorials archive. There are many zipped popup card designs that include SVG files available here:  https://groups.io/g/PCS-Tuts/files/Shared%20Popup%20Files  These are free downloads. Last year 24 people contributed towards transferring the Shared Files from the PCS_Tuts Yahoo group to groups.io  I was able to archive all of the tutorials, photos, files, and shared files from that group and post the archive in my Drop Box. If you would like to download that PCS_Tuts Archive, you can send a contribution of any amount to me via paypal: julieflanagan @ juno . com (leave out the spaces), and I will send you the link for it.  

I have been sending links to the email addresses provided by PayPal. If you need your archive sent to a different email address, please be sure to include that in a note when you make your contribution. Also let me know which archive you need: MTC_Tuts, MTC_Tuts Old, or PCS_Tuts. 

The MTC_Tuts_Old archive includes tutorials created for versions of MTC prior to version 4.1.0.  

Let me know if you have further questions about these archives.

Thanks again for your support! 

Julie


Re: MTC_Tuts Archives

Dee Kortan
 

Julie,

Thank you for all you do!  

I don't do much crafting, I never really took advantage of all that MTC can do.  I'm just mainly do simple cuts.   I would like to still donate again, but I can't remember how?

I was wondering if you could explain why some of my MTC files will not let me change them to svgs?  I was able to do some, but not others.


Thank you again for all you do and have done.

Dee

On Tuesday, October 13, 2020, 01:19:55 PM CDT, Julie Flanagan <craftymusician@...> wrote:


Thanks so much for those of you who have been able to contribute towards the MTC_Tuts Archives. Just a reminder to put the link I sent you in a special place so that in the event of a computer crash or new computer, etc, you can go back to my drop box and get the archives again. I just added some more surprise content, so if you downloaded the archived files in the past few days, be sure to go back again to get one more zipped file. Instructions for using it are included in the collection. 

If you have not made a contribution, you may still do so. 

Some have asked about the Popup Card Studio Tutorials archive. There are many zipped popup card designs that include SVG files available here: https://groups.io/g/PCS-Tuts/files/Shared%20Popup%20Files  These are free downloads. Last year 24 people contributed towards transferring the Shared Files from the PCS_Tuts Yahoo group to groups.io  I was able to archive all of the tutorials, photos, files, and shared files from that group and post the archive in my Drop Box. If you would like to download that PCS_Tuts Archive, you can send a contribution of any amount to me via paypal: julieflanagan @ juno . com (leave out the spaces), and I will send you the link for it.  

I have been sending links to the email addresses provided by PayPal. If you need your archive sent to a different email address, please be sure to include that in a note when you make your contribution. Also let me know which archive you need: MTC_Tuts, MTC_Tuts Old, or PCS_Tuts. 

The MTC_Tuts_Old archive includes tutorials created for versions of MTC prior to version 4.1.0.  

Let me know if you have further questions about these archives.

Thanks again for your support! 

Julie


Re: Prime Day 2020 for Crafters

Julie Flanagan
 

These are 3rd party mats. I have used the other 3rd party mats on my list, and they work fine for me. I have not tried the ones you mentioned. But I think the price has come down. I ordered some to try. I go through lots of mats. It is always good to have extras around.

Julie

On 10/13/2020 12:03 PM salley schwartz via groups.io <salleys@...> wrote:


Circuit mats ...3 for $9.80. Don't know how good that is.
Some other things I have looked at say they are reduced for prime day but look like the same price to me




On Tue, Oct 13, 2020 at 11:56 AM, Julie Flanagan
<craftymusician@...> wrote:
Have you found any great deals on Amazon Prime day? Please share your great finds!

https://cuttercrafter.com/prime-day-2020-for-crafters/

Julie


Re: Prime Day 2020 for Crafters

Julie Flanagan
 

That is an excellent price for Cricut Mats.

Julie

On 10/13/2020 12:03 PM salley schwartz via groups.io <salleys@...> wrote:


Circuit mats ...3 for $9.80. Don't know how good that is.
Some other things I have looked at say they are reduced for prime day but look like the same price to me




On Tue, Oct 13, 2020 at 11:56 AM, Julie Flanagan
<craftymusician@...> wrote:
Have you found any great deals on Amazon Prime day? Please share your great finds!

https://cuttercrafter.com/prime-day-2020-for-crafters/

Julie


Re: MTC_Tuts Archives

Julie Flanagan
 

SVG files for many are included.

Julie

On 10/13/2020 12:43 PM Margaret Mahony <mimwc@...> wrote:


Julie
Are these files only for MTC??
THANKS
Margaret


From: main@MTC-Tuts.groups.io <main@MTC-Tuts.groups.io> on behalf of Julie Flanagan <craftymusician@...>
Sent: Tuesday, October 13, 2020 11:19:37 AM
To: main@MTC-Tuts.groups.io <main@MTC-Tuts.groups.io>
Subject: [Special] [MTC-Tuts] MTC_Tuts Archives

Thanks so much for those of you who have been able to contribute towards the MTC_Tuts Archives. Just a reminder to put the link I sent you in a special place so that in the event of a computer crash or new computer, etc, you can go back to my drop box and get the archives again. I just added some more surprise content, so if you downloaded the archived files in the past few days, be sure to go back again to get one more zipped file. Instructions for using it are included in the collection. 

If you have not made a contribution, you may still do so. 

Some have asked about the Popup Card Studio Tutorials archive. There are many zipped popup card designs that include SVG files available here:  https://groups.io/g/PCS-Tuts/files/Shared%20Popup%20Files  These are free downloads. Last year 24 people contributed towards transferring the Shared Files from the PCS_Tuts Yahoo group to groups.io  I was able to archive all of the tutorials, photos, files, and shared files from that group and post the archive in my Drop Box. If you would like to download that PCS_Tuts Archive, you can send a contribution of any amount to me via paypal: julieflanagan @ juno . com (leave out the spaces), and I will send you the link for it.  

I have been sending links to the email addresses provided by PayPal. If you need your archive sent to a different email address, please be sure to include that in a note when you make your contribution. Also let me know which archive you need: MTC_Tuts, MTC_Tuts Old, or PCS_Tuts. 

The MTC_Tuts_Old archive includes tutorials created for versions of MTC prior to version 4.1.0.  

Let me know if you have further questions about these archives.

Thanks again for your support! 

Julie


Re: MTC_Tuts Archives

Julie Flanagan
 

There are many popup card files included that are in SVG format. All of the linked Gallery files for PCS are in SVG format, so you should be able to use those as well.

Julie

On 10/13/2020 3:24 PM Apral Harrel <icrea8@...> wrote:


Are the files for the pop-up cards in SVG format?  That is the only format I can use because I have a Cricut Maker. 


Thank you for making these files available. 


Thanks,



Ran our of toilet paper and now using lettuce leaves. 

Today was just the tip of the iceberg, tomorrow romaines to be seen.

 

APRAL




From: main@MTC-Tuts.groups.io <main@MTC-Tuts.groups.io> On Behalf Of Julie Flanagan
Sent: Tuesday, October 13, 2020 11:20 AM
To: main@MTC-Tuts.groups.io
Subject: [Special] [MTC-Tuts] MTC_Tuts Archives


Thanks so much for those of you who have been able to contribute towards the MTC_Tuts Archives. Just a reminder to put the link I sent you in a special place so that in the event of a computer crash or new computer, etc, you can go back to my drop box and get the archives again. I just added some more surprise content, so if you downloaded the archived files in the past few days, be sure to go back again to get one more zipped file. Instructions for using it are included in the collection. 

If you have not made a contribution, you may still do so. 

Some have asked about the Popup Card Studio Tutorials archive. There are many zipped popup card designs that include SVG files available here: https://groups.io/g/PCS-Tuts/files/Shared%20Popup%20Files  These are free downloads. Last year 24 people contributed towards transferring the Shared Files from the PCS_Tuts Yahoo group to groups.io  I was able to archive all of the tutorials, photos, files, and shared files from that group and post the archive in my Drop Box. If you would like to download that PCS_Tuts Archive, you can send a contribution of any amount to me via paypal: julieflanagan @ juno . com (leave out the spaces), and I will send you the link for it.  

I have been sending links to the email addresses provided by PayPal. If you need your archive sent to a different email address, please be sure to include that in a note when you make your contribution. Also let me know which archive you need: MTC_Tuts, MTC_Tuts Old, or PCS_Tuts. 

The MTC_Tuts_Old archive includes tutorials created for versions of MTC prior to version 4.1.0.  

Let me know if you have further questions about these archives.

Thanks again for your support! 

Julie



Re: MTC_Tuts Archives

Apral Harrel
 

Are the files for the pop-up cards in SVG format?  That is the only format I can use because I have a Cricut Maker. 

 

Thank you for making these files available. 

 

Thanks,

 

 

Ran our of toilet paper and now using lettuce leaves. 

Today was just the tip of the iceberg, tomorrow romaines to be seen.

 

APRAL

 

 

 

From: main@MTC-Tuts.groups.io <main@MTC-Tuts.groups.io> On Behalf Of Julie Flanagan
Sent: Tuesday, October 13, 2020 11:20 AM
To: main@MTC-Tuts.groups.io
Subject: [Special] [MTC-Tuts] MTC_Tuts Archives

 

Thanks so much for those of you who have been able to contribute towards the MTC_Tuts Archives. Just a reminder to put the link I sent you in a special place so that in the event of a computer crash or new computer, etc, you can go back to my drop box and get the archives again. I just added some more surprise content, so if you downloaded the archived files in the past few days, be sure to go back again to get one more zipped file. Instructions for using it are included in the collection. 

If you have not made a contribution, you may still do so. 

Some have asked about the Popup Card Studio Tutorials archive. There are many zipped popup card designs that include SVG files available here: https://groups.io/g/PCS-Tuts/files/Shared%20Popup%20Files  These are free downloads. Last year 24 people contributed towards transferring the Shared Files from the PCS_Tuts Yahoo group to groups.io  I was able to archive all of the tutorials, photos, files, and shared files from that group and post the archive in my Drop Box. If you would like to download that PCS_Tuts Archive, you can send a contribution of any amount to me via paypal: julieflanagan @ juno . com (leave out the spaces), and I will send you the link for it.  

I have been sending links to the email addresses provided by PayPal. If you need your archive sent to a different email address, please be sure to include that in a note when you make your contribution. Also let me know which archive you need: MTC_Tuts, MTC_Tuts Old, or PCS_Tuts. 

The MTC_Tuts_Old archive includes tutorials created for versions of MTC prior to version 4.1.0.  

Let me know if you have further questions about these archives.

Thanks again for your support! 

Julie

201 - 220 of 31681