Date   

Re: Studio Designer V3

Julie Flanagan
 

It is possible to run Silhouette Studio Designer Edition V3 and run older versions as well. Write to me off list for information on how to do this.

Julie
craftymusician@...


From: "marvilyn lyons marvilyn.lyons@... [MTC_Tuts]"
To: "MTC Tuts"
Sent: Friday, July 25, 2014 2:40:22 PM
Subject: Re: [MTC_Tuts] Studio Designer V3

 

Unfortunately, I did too:(

On Jul 24, 2014 2:17 AM, "sfarnham@... [MTC_Tuts]" <MTC_Tuts@...> wrote:
 

Did I loose the ability to save as svg with the new version of Silhouette V3?  I can't make it happen.

Sandra



Re: Studio Designer V3

Marvilyn
 

Unfortunately, I did too:(

On Jul 24, 2014 2:17 AM, "sfarnham@... [MTC_Tuts]" <MTC_Tuts@...> wrote:
 

Did I loose the ability to save as svg with the new version of Silhouette V3?  I can't make it happen.

Sandra


Re: Studio Designer V3

Stephanie E
 

You can either deactivate your DE license each time you're ready to close either 1.9/2.0 or 3.0 and re-enter it in the version that you open.

Or... keep copies of the license folder for each version (activate each one) and paste (under program data) which ever one you're wanting to open at the time.


Re: Pazzles Vue shipping

Silvia Patiño
 

Hi Julie

Have you used pazzle blades in the zing?



El 25/07/2014, a las 10:06, "craftymusician@... [MTC_Tuts]" <MTC_Tuts@...> escribió:

 

I don't think there is any such thing as "Universal cutting blades".  The blade holder that ships with the Zing uses a different blade than any of my other cutters. However, the blades for the "Click" style holders do work in a number of cutters. Pazzles Vue uses the same blade holder as the Pazzles Inspiration and Cricut Expression. With the proper depth adjustments I am able to use blades made for Pazzles, Gazelle, Eclips, Roland, Cricut, etc. interchangeably. The Pazzles blade tends to have a slightly longer tip than the others. I normally use the blades made for the Pazzles in the Pazzles machines for consistent results. However, I do use Pazzles blades in my Gazelle, Cricut, and Eclips. In a pinch the blades would be interchangeable.


From: "Carol DeMeyer fennel98597@... [MTC_Tuts]" <MTC_Tuts@...>
To: "MTC Tuts" <MTC_Tuts@...>
Sent: Friday, July 25, 2014 7:20:45 AM
Subject: Re: [MTC_Tuts] Pazzles Vue shipping

 


Hi Julie,
I have considered getting the Pazzles too, but wonder if I can use universal cutting blades like I do on my Zing. Do you know if the regular normal blades we all use will interface with the Pazzles?
Thanks,  Carol DeMeyer


From: "craftymusician@... [MTC_Tuts]" <MTC_Tuts@...>
To: MTC_Tuts@...
Sent: Thursday, July 24, 2014 4:44 PM
Subject: [MTC_Tuts] Pazzles Vue shipping

 
I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 

 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 

Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.

Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.

You can check it out here:













Re: Pazzles Vue shipping

Christy Russell <christy.russell@...>
 

I don't think color matters because when you go to complete your order, you can pick again whatever color you want - you can change your mind if you want.  I think they are doing small batches at a time because they are still going through and testing all the machines that came in.  You should probably get your email very soon!!!!

It's SO exciting!!!!  I can't wait til it comes!!

Christy



On Fri, Jul 25, 2014 at 12:54 PM, Deborah Yarbrough ldsmom@... [MTC_Tuts] <MTC_Tuts@...> wrote:
 

Hmm... My paypal deposit cleared on the first day of ordering, but I haven't heard anything more about shipping... makes me wonder if it was the color I chose or what?

Deb

On 7/24/2014 7:44 PM, craftymusician@... [MTC_Tuts] wrote:
 

I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 


 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 


Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.


Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.


You can check it out here:

http://tinyurl.com/PazzlesVue






Julie, craftymusician@...
Purchase MTC:  http://tinyurl.com/Purchase-MTC
Purchase Popup Card Studio: http://tinyurl.com/PCS-Fes
Purchase Pazzles: http://tinyurl.com/PazzlesVue
http://groups.yahoo.com/group/MTC_Tuts/





Re: Pazzles Vue shipping

Patti Briggs
 

I got my coupon code for the $99 special yesterday, but I was on the Pazzles website ordering in the first 5 minutes it went for sale.   And boy oh boy did I pay the remaining as soon ​as I saw that email yesterday.  So I'm hoping I may be one of the first ones to ship and I am soooo excited to get my hands on it.
 
Patti


On Fri, Jul 25, 2014 at 12:11 PM, craftymusician@... [MTC_Tuts] <MTC_Tuts@...> wrote:
 

They are processing pre-orders in the order which they were received. Also, they may be processing outright purchases before the $99 specials. I do know that they are working right now on getting the coupon codes for the $99 specials out in the next few hours. So if yours was among the first orders placed, you may be getting your email today. They plan to start shipping next week. 


From: "Deborah Yarbrough ldsmom@... [MTC_Tuts]" <MTC_Tuts@...>
To: "MTC Tuts" <MTC_Tuts@...>
Sent: Friday, July 25, 2014 10:54:57 AM
Subject: Re: [MTC_Tuts] Pazzles Vue shipping


 

Hmm... My paypal deposit cleared on the first day of ordering, but I haven't heard anything more about shipping... makes me wonder if it was the color I chose or what?

Deb

On 7/24/2014 7:44 PM, craftymusician@... [MTC_Tuts] wrote:
 

I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 


 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 


Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.


Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.


You can check it out here:

http://tinyurl.com/PazzlesVue






Julie, craftymusician@...
Purchase MTC:  http://tinyurl.com/Purchase-MTC
Purchase Popup Card Studio: http://tinyurl.com/PCS-Fes
Purchase Pazzles: http://tinyurl.com/PazzlesVue
http://groups.yahoo.com/group/MTC_Tuts/






Re: Pazzles Vue shipping

Julie Flanagan
 

They are processing pre-orders in the order which they were received. Also, they may be processing outright purchases before the $99 specials. I do know that they are working right now on getting the coupon codes for the $99 specials out in the next few hours. So if yours was among the first orders placed, you may be getting your email today. They plan to start shipping next week. 


From: "Deborah Yarbrough ldsmom@... [MTC_Tuts]"
To: "MTC Tuts"
Sent: Friday, July 25, 2014 10:54:57 AM
Subject: Re: [MTC_Tuts] Pazzles Vue shipping

 

Hmm... My paypal deposit cleared on the first day of ordering, but I haven't heard anything more about shipping... makes me wonder if it was the color I chose or what?

Deb

On 7/24/2014 7:44 PM, craftymusician@... [MTC_Tuts] wrote:
 

I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 


 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 


Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.


Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.


You can check it out here:

http://tinyurl.com/PazzlesVue






Julie, craftymusician@...
Purchase MTC:  http://tinyurl.com/Purchase-MTC
Purchase Popup Card Studio: http://tinyurl.com/PCS-Fes
Purchase Pazzles: http://tinyurl.com/PazzlesVue
http://groups.yahoo.com/group/MTC_Tuts/





Re: Pazzles Vue shipping

Deb
 

Hmm... My paypal deposit cleared on the first day of ordering, but I haven't heard anything more about shipping... makes me wonder if it was the color I chose or what?

Deb

On 7/24/2014 7:44 PM, craftymusician@... [MTC_Tuts] wrote:
 

I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 


 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 


Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.


Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.


You can check it out here:

http://tinyurl.com/PazzlesVue






Julie, craftymusician@...
Purchase MTC:  http://tinyurl.com/Purchase-MTC
Purchase Popup Card Studio: http://tinyurl.com/PCS-Fes
Purchase Pazzles: http://tinyurl.com/PazzlesVue
http://groups.yahoo.com/group/MTC_Tuts/




Register for the July 29 MTC/PCS Q&a Webinar

Julie Flanagan
 

I know it is earlier than usual, but I need to post this now before heading to the wilderness for an extended weekend. You may register here for the July 29, 2014 MTC/PCS Q&A Webinar scheduled to start at about 8:30 PMEDT (5:30 PM Pacific) on Tuesday, July 29, 2014: 

MTC/PCS Q&A

Be sure to post any questions that you would like to have addressed during the free, live webinar at the Make The Cut Forum once the topic is posted at the top of the discussion list.


Bryan has posted the Vimeo recording for the July 22, 2014 webinar here:

Make The Cut! and Popup Card Studio Q&A Webinar - July 22, 2014 

Bryan demonstrated how to use the Duplicate>Rotate function.


I demonstrated how to create a gatefold card using stained glass patterns, and demonstrated how to make a Love Birds in a cage design.

 


Julie, craftymusician@...
Purchase MTC:  http://tinyurl.com/Purchase-MTC
Purchase Popup Card Studio: http://tinyurl.com/PCS-Fes
Purchase Pazzles: http://tinyurl.com/PazzlesVue
MTC Tutorials



Re: New Video Tutorial-Stained Glass Rose Card

Jeanette Block
 

Thank you Julie for clarifying this - I was missing the "remove original image" instruction.  Now it works for me!


Re: Custom Matt Issue

hughescd1@...
 

Liz,
Thank you so much for the information.  That was way to easy!  Worked like a charm :)
Thanks again,
Carol From Las Vegas


Re: Pazzles Vue shipping

Julie Flanagan
 

I don't think there is any such thing as "Universal cutting blades".  The blade holder that ships with the Zing uses a different blade than any of my other cutters. However, the blades for the "Click" style holders do work in a number of cutters. Pazzles Vue uses the same blade holder as the Pazzles Inspiration and Cricut Expression. With the proper depth adjustments I am able to use blades made for Pazzles, Gazelle, Eclips, Roland, Cricut, etc. interchangeably. The Pazzles blade tends to have a slightly longer tip than the others. I normally use the blades made for the Pazzles in the Pazzles machines for consistent results. However, I do use Pazzles blades in my Gazelle, Cricut, and Eclips. In a pinch the blades would be interchangeable.


From: "Carol DeMeyer fennel98597@... [MTC_Tuts]"
To: "MTC Tuts"
Sent: Friday, July 25, 2014 7:20:45 AM
Subject: Re: [MTC_Tuts] Pazzles Vue shipping

 


Hi Julie,
I have considered getting the Pazzles too, but wonder if I can use universal cutting blades like I do on my Zing. Do you know if the regular normal blades we all use will interface with the Pazzles?
Thanks,  Carol DeMeyer


From: "craftymusician@... [MTC_Tuts]"
To: MTC_Tuts@...
Sent: Thursday, July 24, 2014 4:44 PM
Subject: [MTC_Tuts] Pazzles Vue shipping

 
I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 

 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 

Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.

Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.

You can check it out here:






Julie, craftymusician@...
Purchase MTC:  http://tinyurl.com/Purchase-MTC
Purchase Popup Card Studio: http://tinyurl.com/PCS-Fes
Purchase Pazzles: http://tinyurl.com/PazzlesVue
http://groups.yahoo.com/group/MTC_Tuts/







Re: Pazzles Vue shipping

Julie Flanagan
 

Here is a link. Scroll to the bottom of the page and click on Learn More under Sign Up. It will take you to the Vue page with the special offers.


From: "Debbie Keith soccerdebla08@... [MTC_Tuts]"
To: "MTC Tuts"
Sent: Thursday, July 24, 2014 9:55:38 PM
Subject: Re: [MTC_Tuts] Pazzles Vue shipping

 

Julie, can you supply a link for the $99 Vue purchase?
Debbie in LA


On Thu, Jul 24, 2014 at 6:44 PM, craftymusician@... [MTC_Tuts] <MTC_Tuts@...> wrote:
 

I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 


 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 


Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.


Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.


You can check it out here:

http://tinyurl.com/PazzlesVue






Julie, craftymusician@...
Purchase MTC:  http://tinyurl.com/Purchase-MTC
Purchase Popup Card Studio: http://tinyurl.com/PCS-Fes
Purchase Pazzles: http://tinyurl.com/PazzlesVue
http://groups.yahoo.com/group/MTC_Tuts/





Re: Pazzles Vue shipping

Carol DeMeyer <fennel98597@...>
 

Hi Julie,
I have considered getting the Pazzles too, but wonder if I can use universal cutting blades like I do on my Zing. Do you know if the regular normal blades we all use will interface with the Pazzles?
Thanks,  Carol DeMeyer


From: "craftymusician@... [MTC_Tuts]"
To: MTC_Tuts@...
Sent: Thursday, July 24, 2014 4:44 PM
Subject: [MTC_Tuts] Pazzles Vue shipping

 
I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 

 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 

Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.

Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.

You can check it out here:









Re: Pazzles Vue shipping

Debbie Keith
 

Julie, can you supply a link for the $99 Vue purchase?
Debbie in LA


On Thu, Jul 24, 2014 at 6:44 PM, craftymusician@... [MTC_Tuts] <MTC_Tuts@...> wrote:
 

I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 


 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 


Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.


Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.


You can check it out here:

http://tinyurl.com/PazzlesVue






Julie, craftymusician@...
Purchase MTC:  http://tinyurl.com/Purchase-MTC
Purchase Popup Card Studio: http://tinyurl.com/PCS-Fes
Purchase Pazzles: http://tinyurl.com/PazzlesVue
http://groups.yahoo.com/group/MTC_Tuts/




Re: Pazzles Vue shipping

Liz Ackerman
 

Oh kudos to Bryan for taking this on!! He definitely is a busy guy...and I know all about the volunteer thing .

Liz
Edmonton AB
 
Innovation distinguishes between a leader and a follower.
—Steve Jobs

Sent: Thursday, July 24, 2014 8:37 PM
Subject: Re: [MTC_Tuts] Pazzles Vue shipping

 

Bryan is working on creating the plugin for the Vue. Pazzles tech support is offering assistance to third party developers to get Vue working with other software. We will have to be patient as Bryan is a volunteer, and he is a very busy man. I look forward to cutting from Make The Cut to the Vue, as soon as the plugin is available. Meanwhile I will play with the Vue software and Pazzles pro 2014 software to get used to them. 

Julie


From: "'Liz' ackerliz@... [MTC_Tuts]"
To: "MTC Tuts" Sent: Thursday, July 24, 2014 7:05:26 PM
Subject: Re: [MTC_Tuts] Pazzles Vue shipping

 

Julie...do you know for sure that Andy is developing a plugin for the new
Vue? I would never consider purchasing a cutter that I couldn't use MTC
with.

Liz
Edmonton AB

Innovation distinguishes between a leader and a follower.
—Steve Jobs

From: craftymusician@... [MTC_Tuts]
Sent: Thursday, July 24, 2014 5:44 PM
To: MTC_Tuts@...
Subject: [MTC_Tuts] Pazzles Vue shipping

I received notice that my new Pazzles Vue is ready to ship. I am so excited!
I pre-ordered the first week it was announced, which seems like a very long
time ago.

I will be sure to post my first impressions as soon as it arrives and I
have a chence to run it through its paces. Currently we do not have an MTC
plugin that will work with it, but there is one in the works.


No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4716 / Virus Database: 3986/7915 - Release Date: 07/24/14


Re: Pazzles Vue shipping

Julie Flanagan
 

Bryan is working on creating the plugin for the Vue. Pazzles tech support is offering assistance to third party developers to get Vue working with other software. We will have to be patient as Bryan is a volunteer, and he is a very busy man. I look forward to cutting from Make The Cut to the Vue, as soon as the plugin is available. Meanwhile I will play with the Vue software and Pazzles pro 2014 software to get used to them. 

Julie


From: "'Liz' ackerliz@... [MTC_Tuts]"
To: "MTC Tuts"
Sent: Thursday, July 24, 2014 7:05:26 PM
Subject: Re: [MTC_Tuts] Pazzles Vue shipping

 

Julie...do you know for sure that Andy is developing a plugin for the new
Vue? I would never consider purchasing a cutter that I couldn't use MTC
with.

Liz
Edmonton AB

Innovation distinguishes between a leader and a follower.
—Steve Jobs

From: craftymusician@... [MTC_Tuts]
Sent: Thursday, July 24, 2014 5:44 PM
To: MTC_Tuts@...
Subject: [MTC_Tuts] Pazzles Vue shipping

I received notice that my new Pazzles Vue is ready to ship. I am so excited!
I pre-ordered the first week it was announced, which seems like a very long
time ago.

I will be sure to post my first impressions as soon as it arrives and I
have a chence to run it through its paces. Currently we do not have an MTC
plugin that will work with it, but there is one in the works.



Re: Pazzles Vue shipping

Liz Ackerman
 

Julie...do you know for sure that Andy is developing a plugin for the new Vue? I would never consider purchasing a cutter that I couldn't use MTC with.

Liz
Edmonton AB

Innovation distinguishes between a leader and a follower.
—Steve Jobs


From: craftymusician@... [MTC_Tuts]
Sent: Thursday, July 24, 2014 5:44 PM
To: MTC_Tuts@...
Subject: [MTC_Tuts] Pazzles Vue shipping



I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago.


I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works.


Re: Custom Matt Issue

Liz Ackerman
 

You can try resetting MTC back to default settings, Help => Advanced => Reset Interface to Factory Settings.

Liz
Edmonton AB

Innovation distinguishes between a leader and a follower.
—Steve Jobs


From: hughescd1@... [MTC_Tuts]
Sent: Thursday, July 24, 2014 3:51 PM
To: MTC_Tuts@...
Subject: [MTC_Tuts] Custom Matt Issue



I saved my first custom mat today. I rename the mat before I saved it. Therefore it saved with my standard 12 x 12 (Typical Mat). Anytime I open one of the standard mats, the custom mat I was trying to create opens over the top. There are two mats showing. UGHHH! What are my options here?
Thanks so much,
Carol From Las Vegas


Pazzles Vue shipping

Julie Flanagan
 

I received notice that my new Pazzles Vue is ready to ship. I am so excited! I pre-ordered the first week it was announced, which seems like a very long time ago. 


 I will be sure to post my first impressions as soon as it arrives and I have a chence to run it through its paces. Currently we do not have an MTC plugin that will work with it, but there is one in the works. 


Pazzles Vue will have a new highly accurate print and cut feature that I am looking forward to playing with. With its 1000 grams of cutting pressure, it will be the most powerful machine in my collection. I like the extended cutting tray that slides out to support the mat.  Its included online software will import WPC and SVG files. I look forward to being able to cut directly to it from Make the Cut once the plugin is ready.


Their new Pazzles Pro software 2014 is an optional software package that will have all the advanced features I am accustomed to using in the Gazelle IV and Funtime 2014 software. It comes in 4 different colors. I chose purple, because I don't have any other cutters that color. With the Pazzles 2-year membership I am getting the machine for $99.  I was thinking about purchasing it outright, but I really like my craftroom membership. Since I will be paying for the membership anyway, I thought I might as well get the machine for $99.  Craftroom membership is an excellent option for people who prefer the convenience of cutting designs made by others. They have some awesome new projects posted each week.


You can check it out here:

http://tinyurl.com/PazzlesVue






Julie, craftymusician@...
Purchase MTC:  http://tinyurl.com/Purchase-MTC
Purchase Popup Card Studio: http://tinyurl.com/PCS-Fes
Purchase Pazzles: http://tinyurl.com/PazzlesVue
http://groups.yahoo.com/group/MTC_Tuts/


7261 - 7280 of 31960