|
Re: A family tree project
Deborah Bridgewater
This is awesome. I have been wanting to do something like this. You have inspired me. Also, I spent time on your blog and really enjoyed everything - you are so talented.
I was wondering also how is your niece? Thanks for sharing your talents!
|
||||||
|
|
||||||
|
guess you want to see that card!
Cheryl Rotnem
see my card!
-- Cheryl my blog: http://cherylsartfulcreations.blogspot.com My groups: cherylscreativestampingpad@... scal-mtc-hints@...
|
||||||
|
|
||||||
|
card from Webinar
Cheryl Rotnem
Here's a card I just finished after watching the webinar last night! I had the heart and just enlarged it a bit. Was super easy to do. Thanks to Bryan!!!
-- Cheryl my blog: http://cherylsartfulcreations.blogspot.com My groups: cherylscreativestampingpad@... scal-mtc-hints@...
|
||||||
|
|
||||||
|
Big Shot Pro?
Michele Jaeb
so Julie, is this the
machine you are always talking about along with the fuse? Is it really
$525?
|
||||||
|
|
||||||
|
Re: A family tree project
allandra42@gmail.com <allandra42@...>
-------Original Message-------
From: Jthrly
Date: 2/19/2013 7:56:00 PM
To: MTC_Tuts@...
Subject: Re: [MTC_Tuts] A family tree project I missed it. Where can I find it???
-------Original Message-------
From: allandra42@...
Date: 2/18/2013 11:29:53 PM
To: MTC_Tuts@...
Subject: Re: [MTC_Tuts] A family tree project Thanks for the compliment I love the way it turned out. I wish you luck! The tree I used came from the Gallery in Make the Cut. Lesa
-------Original Message-------
From: 4littlebs@...
Date: 2/18/2013 3:11:22 PM
To: MTC_Tuts@...
Subject: Re: [MTC_Tuts] A family tree project I left a comment on your blog...but wanted to say how much I love your tree Now I’m off to find directions..lol
Alicia
From: allandra42@...
Sent: Sunday, February 17, 2013 4:52 PM
Subject: [MTC_Tuts] A family tree project
No virus found in this message. 
|
||||||
|
|
||||||
|
Webinar in Progress
Julie Flanagan
1. Please join my Webinar.
https://www1.gotowebinar.com/register/354375113 2. You will be connected to audio using your computer's microphone and speakers (VoIP). A headset is recommended. Or, you may select "Use Telephone" after joining the Webinar. Dial +1 (415) 655-0053 Access Code: 824-533-926 Audio PIN: Shown after joining the webinar Webinar ID: 354-375-113 GoToWebinar® Webinars Made Easy®
|
||||||
|
|
||||||
|
Re: ATTENTION: is the new stable MTC 4.4.0 mac compatible
BEN BARTLETT
Bryan!! Wow---thank you so very much for letting us know about the update for the mac, too---double WOW!! When I clicked on the download, it pulled up the little screen/box/window that Andy made that has the MTC bridge and the box---and video and instructions---that appears to be like I had initially done when loading it on the mac originally. To make sure--Do I do everything that it says to do ---again? Or do I do something else since the original mac version is already operable? thank you sooooo very much for your wisdom on this:) be blessed ~Beyond Measure Tammy www.urbeyondmeasure.com To: MTC_Tuts@... CC: riasembroidery@... From: sbw1@... Date: Mon, 18 Feb 2013 18:32:43 -0500 Subject: Re: [MTC_Tuts] Re: ATTENTION: is the new stable MTC 4.4.0 mac compatible
The latest version of both versions (.exe and .dmg) can be
downloaded from the main Make The Cut! website's download page: http://make-the-cut.com/Download.aspx Bryan
On 2/18/2013 10:14 AM, naseemalaher
wrote:
|
||||||
|
|
||||||
|
OT L.I.F.E.
BEN BARTLETT
Hi!!
There's a new post at www.urbeyondmeasure.com. I sincerely value your input as to what you'd like to see or not and the like:) This site is a site for you---because you are so very special to me:) Huge hugs and be blessed ~Beyond Measure tammy www.urbeyondmeasure.com PS--if you scroll down through the following post---there's a very luxurious but extremely easy recipe for a Coffee Body scrub:) Try it you'll be blessed:)
|
||||||
|
|
||||||
|
Re: Graphtec CE6000-60 and Mtc
Becky Pacey <becky.pacey@...>
You should get in touch with Penny Duncan Creations.com Penny can tell you all you want to know about this machine. She loves them. She is really good about helping people also.
Becky
On Tue, Feb 19, 2013 at 5:09 AM, Vella Smith <vella2353@...> wrote:
|
||||||
|
|
||||||
|
Re: Graphtec CE6000-60 and Mtc
Trisha
My understanding is that these machines are home versions of commercial vinyl cutters. They are basically the same thing, all variations on a theme. The programs we use, including MTC, have been developed with the home crafter in mind, to use with materials other than vinyl.
toggle quoted messageShow quoted text
Trisha In God We STILL Trust
--- In MTC_Tuts@..., "sampheap" <sampheap@...> wrote:
|
||||||
|
|
||||||
|
Re: Graphtec CE6000-60 and Mtc
allandra42@gmail.com <allandra42@...>
-------Original Message-------
From: sampheap
Date: 2/18/2013 11:27:35 PM
To: MTC_Tuts@...
Subject: [MTC_Tuts] Re: Graphtec CE6000-60 and Mtc May I ask if those vinyl cutter have no problem cutting wide range of material like Silver Bullet and Cougar? Or is it built just for vinyl biz?
--- In MTC_Tuts@..., Vella Smith wrote:
>
> I recently purchased a new Graphtec CE6000-60. Will this work with MTC? I
> sure hope so because I love MTC!!!
>
> Have a Great day!
> Vella Smith
>
> http://autibotdesigns.shutterfly.com/<http://autibotdesigns.shutterfly.com/#%26emid%3dsite_sitecreated%26cid%3dSHARE3SXXXX>
> autibotdesigns@...
> *
> *
> *Vella's Business Solutions for all your Accounting needs!!!*
> *"Making ¢ out of your business"
> *vella2353@...
> 832-264-5019 Cell
> 281-815-7977 Home
>
>
> On Mon, Feb 18, 2013 at 2:31 PM, Beverley Larsen wrote:
>
> > **
> >
> >
> > I have just started using a 24" Silver Bullet, which I'm sure I will
> > totally love once I figure out how to use it with MTC. Could any of you
> > Silver Bullet owners who use MTC with it please tell me how you get the
> > Bullet to cut exactly where you want it to? I am about to go bald from
> > tearing my own hair out.
> >
> > Beverley
> >
> >
> >
> >
> > .
> >
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
|
||||||
|
|
||||||
|
Re: A family tree project
Janie
-------Original Message-------
From: allandra42@...
Date: 2/18/2013 11:29:53 PM
To: MTC_Tuts@...
Subject: Re: [MTC_Tuts] A family tree project Thanks for the compliment I love the way it turned out. I wish you luck! The tree I used came from the Gallery in Make the Cut. Lesa
-------Original Message-------
From: 4littlebs@...
Date: 2/18/2013 3:11:22 PM
To: MTC_Tuts@...
Subject: Re: [MTC_Tuts] A family tree project I left a comment on your blog...but wanted to say how much I love your tree Now I’m off to find directions..lol
Alicia
From: allandra42@...
Sent: Sunday, February 17, 2013 4:52 PM
Subject: [MTC_Tuts] A family tree project
No virus found in this message. 
|
||||||
|
|
||||||
|
Re: Graphtec CE6000-60 and Mtc
Vella Smith <vella2353@...>
According to specs it cuts wide range of material. But it doesn't have cutting matts fir the machine to add paper.
On Feb 18, 2013 10:27 PM, "sampheap" <sampheap@...> wrote:
> > > > May I ask if those vinyl cutter have no problem cutting wide range of material like Silver Bullet and Cougar? Or is it built just for vinyl biz? > > > --- In MTC_Tuts@..., Vella Smith wrote: > > > > I recently purchased a new Graphtec CE6000-60. Will this work with MTC? I > > sure hope so because I love MTC!!! > > > > Have a Great day! > > Vella Smith > > > > http://autibotdesigns.shutterfly.com/http://autibotdesigns.shutterfly.com/#%26emid%3dsite_sitecreated%26cid%3dSHARE3SXXXX> > > autibotdesigns@... > > > * > > * > > *Vella's Business Solutions for all your Accounting needs!!!* > > *"Making ¢ out of your business" > > *vella2353@... > > 832-264-5019 Cell > > 281-815-7977 Home > > > > > > > On Mon, Feb 18, 2013 at 2:31 PM, Beverley Larsen wrote: > > > > > ** > > > > > > > > > I have just started using a 24" Silver Bullet, which I'm sure I will > > > totally love once I figure out how to use it with MTC. Could any of you > > > Silver Bullet owners who use MTC with it please tell me how you get the > > > Bullet to cut exactly where you want it to? I am about to go bald from > > > tearing my own hair out. > > > > > > Beverley > > > > > > > > > > > > > > > . > > > > > > > > > > > > >
|
||||||
|
|
||||||
|
Meet Bobbie
Yvonne van Sambeek
Hi MTC Friends
I saw this
http://www.letsmakecards.com/index.php/videos/view/make_a_concertina_book_using_sizzix_happi_dies/
And with MTC I made Bobbie. Love the program.
Kind regards from The Netherlands.
Yvonne van Sambeek
|
||||||
|
|
||||||
|
Re: about tutorials ?
Julie Flanagan
I can watch them on my Roku. If Vimeo is available on yours, then yes, you should be able to watch the webinars on it. Here is some information that Gabe posted at the MTC Forum referring to Roku, but perhaps the procedure using your box is similar: "go to "Photos and Video." Then scroll through that till you find "Vimeo." Add that channel. Then start up the Vimeo channel and use the Vimeo search function to find "mtc llc" and it will show you the MTC webinars. Then I found a webinar I wanted to see and I "liked" it to put it in my favorites list. You can do that a few times to get several videos in that list and make them easy to find. " Julie, craftymusician@... Flanagan Educational Services Purchase MTC: tinyurl.com/JF-MTC2 Purchase Pazzles: http://tinyurl.com/Pazzles-JF http://groups.yahoo.com/group/MTC_Tuts/
From: "Retta" To: "MTC Tuts" Sent: Monday, February 18, 2013 6:53:58 PM Subject: [MTC_Tuts] about tutorials ? Am able to watch the recordings on my Appleton box. I saw Vamo on there and wondered how to look that up. Thanks Retta
The latest version of both versions (.exe and .dmg) can be downloaded from the main Make The Cut! website's download page: On 2/18/2013 10:14 AM, naseemalaher wrote:
|
||||||
|
|
||||||
|
Re: A family tree project
allandra42@gmail.com <allandra42@...>
-------Original Message-------
From: 4littlebs@...
Date: 2/18/2013 3:11:22 PM
To: MTC_Tuts@...
Subject: Re: [MTC_Tuts] A family tree project I left a comment on your blog...but wanted to say how much I love your tree Now I’m off to find directions..lol
Alicia
From: allandra42@...
Sent: Sunday, February 17, 2013 4:52 PM
Subject: [MTC_Tuts] A family tree project
No virus found in this message.
|
||||||
|
|
||||||
|
about tutorials ?
Retta <sumpter5@...>
Am able to watch the recordings on my Appleton box. I saw Vamo on there and wondered how to look that up. Thanks Retta
The latest version of both versions (.exe and .dmg) can be downloaded from the main Make The Cut! website's download page:
On 2/18/2013 10:14 AM, naseemalaher wrote:
|
||||||
|
|
||||||
|
Re: Graphtec CE6000-60 and Mtc
sampheap
May I ask if those vinyl cutter have no problem cutting wide range of material like Silver Bullet and Cougar? Or is it built just for vinyl biz?
toggle quoted messageShow quoted text
--- In MTC_Tuts@..., Vella Smith <vella2353@...> wrote:
|
||||||
|
|
||||||
|
Re: Silver Bullet and Mtc
Julie Flanagan
I don't have a silver bullet or cougar, so I cannot address your issues specifically. However, you might try the MTC plugin for KNK Maxx, as it has been updated more recently. Set the baud rate to 38400 You do need to change the deault settings for the X and Y numbers. You should install both the Cougar plugin and the KNK plugin first before trying to cut from MTC to your Cougar or Silver Bullet. See the first post in this thread at the MTC forum to review the features of the KNK Plugin. Andy covered this information during one of the Webinar. Here is a link to the May 3 webinar video recording.The discussion covering the new plugin is about 35 minutes and 30 seconds into the webinar. Here are a few tips for cutting from MTC to the Cougar or Silver Bullet using the KNK plugin: 1. Open MTC 2. Use the virtual mat tab on the right side of the screen to select your mat orientation to portrait. 3. Put your design work in the bottom right hand side of the mat when finished designing. 4. Mark your mat in inches with a marker, and indicate 2 inches from the right on the mat. 5. Set your laser to the 2 inch mark from the bottom right side on your mat. 6. Load your paper on the mat. 7. Plug in the power cable to your machine. 8. Plug in the USB cable to the machine and connect to your computer. 9. Turn on the power to the cutter. Make sure the computer has recognized your new hardware. 10. Download the KNK plugin from here and install it. 11. From the Cut Project With menu at the top of the screen, select Klic 'n Kut Series 12. Select KNK Maxx 13. Set the baud rate to 38400 14. Select the Com port (not Com 3) 15. Set Force and Speed 16. Click on the tiny wrench icon at the very top of the window next to Klic 'n Kut model to set the laser offset. This offset may be opposite that used with the Cougar plugin. In the Knk plugin the minus goes on the y not the x like in the cougar plugin. 17. Test with a pen in the holder to determine where the cut will be made. Kim posted some instructions for doing Print and Cut projects to the Cougar using the KNK plugin here. Some video tutorials that may help: Cougar & MTC Print and Cut Using Knife Point Additional videos If you are having connection issues, the Cougar likes the Serial connect better than the USB connection, and it is more reliable. Try the Keyspan Serial Port adapter if your laptop doesn't have a serial port. If you lose the connection between computer and cutter, see some information regardingUSB power settings here. If you have any problems getting the Cougar to work, please contact Rachelann atrachellabrunner@...m Here are some recommendations by Rachelanne: Put your mat orientation to portrait. Put your design work in the bottom right hand side of the mat when finished designing. Set your laser to the 2 inch mark from the bottom right side on your mat. I marked my mat in inches with a marker so I knew where the 2 inch from the right was on the mat. I do not know why, but it just clicked for me and then I just cut away. I hope it makes sense, it sure worked for me. here is a libnk to a calibration video for the cougars and MTC These are not my videos but was given them to help others . http://connectpro18637800.adobeconnect.com/p1n89wvvaz6/ here is a link to PNC video. http://connectpro18637800.adobeconnect.com/p8v21gqe6zi/ and knife point. http://connectpro18637800.adobeconnect.com/p60m4p5uqqm/ These are made using MTC and the Cougars I hope thses will help. Julie, craftymusician@... Flanagan Educational Services Purchase MTC: tinyurl.com/JF-MTC2 Purchase Pazzles: http://tinyurl.com/Pazzles-JF http://groups.yahoo.com/group/MTC_Tuts/
From: bonnie@... To: "MTC Tuts" Sent: Monday, February 18, 2013 4:03:42 PM Subject: Re: [MTC_Tuts] Silver Bullet and Mtc I have the same problem with my 24" cougar and would love to know the
|
||||||
|
|
||||||
|
Re: Silver Bullet and Mtc
Bonnie
I have the same problem with my 24" cougar and would love to know the
answer to this question also. Thanks in advance for any help you can offer. I have just started using a 24” Silver Bullet, which I’m sure I willTake care and Happy Scrappin', Bonnie Guess Scrap-N-Away (661)245-2468 http://www.scrap-n-away.com http://scrap-n-away.blogspot.com
|
||||||
|
|