Date   

Re: cross cutting file

Cheryl Rotnem
 

You might check out Penny Duncan, I know she has crosses!


On Wed, Feb 13, 2013 at 8:30 PM, judi_cassie <mamathistle@...> wrote:
 

In 2010 spellbinders had a special Easter die cut of crosses which is no longer available ..does any one know where I might find a cutting file of some crosses like them..the one I liked was the one with a circle wreath around it..I just got their new one and don't like it..besides it don't cut good ..would rather do it on my wishblade if I can find a cutting file...
Thanks: Judi





Re: cross cutting file

Barbie Creech
 

I got a free font set from daFont of Christian crosses. There are many there. Not sure if the one with the wreath is there or not, but you might want to check it out.
Hugs, smiles and happy thoughts!
Barbie
KNK Design Team Associate for www.KNKUSA.com
 


Re: About spellbinders....

Goldie Holzer
 

Thanks.  I’ll have to give that a try!

 

From: MTC_Tuts@... [mailto:MTC_Tuts@...] On Behalf Of Lois John
Sent: Wednesday, February 13, 2013 6:30 PM
To: MTC_Tuts@...
Subject: [MTC_Tuts] Re: About spellbinders....

 

 

Goldie, I haven't done it, but I have heard of people cutting out the labels with black paper, then scanning and  bringing them into the software and tracing them.  You would only have to do one of each as you could enlarge them in the software.


cross cutting file

judi
 

In 2010 spellbinders had a special Easter die cut of crosses which is no longer available ..does any one know where I might find a cutting file of some crosses like them..the one I liked was the one with a circle wreath around it..I just got their new one and don't like it..besides it don't cut good ..would rather do it on my wishblade if I can find a cutting file...
Thanks: Judi


Re: About spellbinders....

Lois John
 

Goldie, I haven't done it, but I have heard of people cutting out the labels with black paper, then scanning and  bringing them into the software and tracing them.  You would only have to do one of each as you could enlarge them in the software.


Re: New file uploaded to MTC_Tuts

Tam
 

O Julie that turned out so pretty. Printed my updated copy last night just have not had a chance to get to it. Now this makes me want to hurry.  TY for all you do for us.
 
 
 

-------Original Message-------
 
Date: 2/13/2013 2:43:27 PM
Subject: Re: [MTC_Tuts] New file uploaded to MTC_Tuts
 
The free cutting file for the leafy swirl with flowers design created during the February 12, 2013 MTC Q&A Webinar has been posted here:
http://groups.yahoo.com/group/MTC_Tuts/files/Shared MTC Files/
The file is named LeafySwirl_JF.mtc 

 You can get the step-by-step, illustrated, printable tutorial covering the techniques used in creation of this design called III.11a_FunWithSwirls.pdf here:
http://groups.yahoo.com/group/MTC_Tuts/files/03_Intermediate_Lessons/

Be sure to watch the Vimeo recording of the Webinar when it is posted to see the great new features of MTC 4.4.0 demonstrated by Andy, and this demo when it is posted. 
In case you cannot see it her, the photo for this project is posted here:

Julie, craftymusician@... Flanagan Educational Services

From: "MTC Tuts"
To: "MTC Tuts"
Sent: Wednesday, February 13, 2013 11:23:51 AM
Subject: [MTC_Tuts] New file uploaded to MTC_Tuts

 


Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the MTC_Tuts
group.

File : /Shared MTC Files/LeafySwirl_JF.mtc
Uploaded by : juliefes craftymusician@...>
Description : Leafy Frame with flowers design created during the Fec 12, 2013 MTC Q&A Webinar demonstrating Tutorial III.11a

You can access this file at the URL:
http://groups.yahoo.com/group/MTC_Tuts/files/Shared%20MTC%20Files/LeafySwirl_JF.mtc

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
Regards,

juliefes craftymusician@...>


 


Re: OT Silhouette Studio on Sale

peggysuecrawford@sbcglobal.net
 

tried yesterday right away when got email and it was out of stock then as well!
 
Peggy


From: Caroline Stedman To: MTC_Tuts@...
Sent: Mon, February 11, 2013 5:07:25 PM
Subject: Re: [MTC_Tuts] OT Silhouette Studio on Sale

 

comes up as “out of stock”
 

From: scrapn@...
Sent: Tuesday, February 12, 2013 7:58 AM
Subject: [MTC_Tuts] OT Silhouette Studio on Sale
 
 

Found this on a blog I follow.
For those of you who wish to purchase Silhouette Studio Designer Edition so you can convert their files to SVG & use in MTC.
"Right now, Punkin Patch Stamps has the Silhouette Studio Designer Edition on sale for $32.99. This includes a $10.00 bonus gift digital gift certificate to SVGCuts.com They have some awesome cutting files".

Here is the link if it didn't copy when I pasted the thread...

http://punkinpatchstamps.com/silhouette/silhouette-studio-designer-edition-digital-download/

Kathy

Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
.


Re: New file uploaded to MTC_Tuts

Julie Flanagan
 

The free cutting file for the leafy swirl with flowers design created during the February 12, 2013 MTC Q&A Webinar has been posted here:
http://groups.yahoo.com/group/MTC_Tuts/files/Shared MTC Files/
The file is named LeafySwirl_JF.mtc 

 You can get the step-by-step, illustrated, printable tutorial covering the techniques used in creation of this design called III.11a_FunWithSwirls.pdf here:
http://groups.yahoo.com/group/MTC_Tuts/files/03_Intermediate_Lessons/

Be sure to watch the Vimeo recording of the Webinar when it is posted to see the great new features of MTC 4.4.0 demonstrated by Andy, and this demo when it is posted. 
In case you cannot see it her, the photo for this project is posted here:

Julie, craftymusician@... Flanagan Educational Services


From: "MTC Tuts"
To: "MTC Tuts"
Sent: Wednesday, February 13, 2013 11:23:51 AM
Subject: [MTC_Tuts] New file uploaded to MTC_Tuts

 


Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the MTC_Tuts
group.

File : /Shared MTC Files/LeafySwirl_JF.mtc
Uploaded by : juliefes craftymusician@...>
Description : Leafy Frame with flowers design created during the Fec 12, 2013 MTC Q&A Webinar demonstrating Tutorial III.11a

You can access this file at the URL:
http://groups.yahoo.com/group/MTC_Tuts/files/Shared%20MTC%20Files/LeafySwirl_JF.mtc

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
Regards,

juliefes craftymusician@...>



New file uploaded to MTC_Tuts

MTC_Tuts@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the MTC_Tuts
group.

File : /Shared MTC Files/LeafySwirl_JF.mtc
Uploaded by : juliefes <craftymusician@...>
Description : Leafy Frame with flowers design created during the Fec 12, 2013 MTC Q&A Webinar demonstrating Tutorial III.11a

You can access this file at the URL:
http://groups.yahoo.com/group/MTC_Tuts/files/Shared%20MTC%20Files/LeafySwirl_JF.mtc

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
Regards,

juliefes <craftymusician@...>


Free Valentine's Day Cutting files

Lisa-Quilling Patch
 

 

Put up a selection of Valentine’s Day cutting files for those of you who are last minute like me J

 

http://www.quillingpatch.com/2013/02/13/free-valentines-day-cutting-files-free-svg-gsd-mtc-and-knk-cutting-files/

 

Lisa

 

 

 


Re: Viewing Tutorials

Julie Flanagan
 

You need to have the latest version of the free Adobe reader at adobe.com in order to open the files. If they don't open on line for you, you can right click on the file name and select Save Target As or Save Link As. Then open the file on your computer. 

Julie, craftymusician@... Flanagan Educational Services
Purchase MTC: tinyurl.com/JF-MTC2 
Purchase Pazzles: http://tinyurl.com/Pazzles-JF
http://groups.yahoo.com/group/MTC_Tuts/


From: courtney@...
To: "MTC Tuts"
Sent: Tuesday, February 12, 2013 7:32:29 PM
Subject: [MTC_Tuts] Viewing Tutorials

 

I can't seem to open the tutorials. I am trying to open the recent one with instructions on how to update MTC without losing the ability to cut to older discontinued cutters. What am I doing wrong?


Viewing Tutorials

Courtney Knude
 

I can't seem to open the tutorials. I am trying to open the recent one with instructions on how to update MTC without losing the ability to cut to older discontinued cutters. What am I doing wrong?


Re: About spellbinders....

Lynn. McNally
 

I cut each of my dies with the die, on black card stock, scanned them into my computer, then traced it, this worked best for me in getting a good trace, 

Lynn McNally 

On Feb 12, 2013, at 6:23 PM, "sbergstc" <sbergstc@...> wrote:

 

Goldie,

I've lots of them from images found on the internet and at various online stores; I try to find the biggest files as they will trace best. I use the single color option and pick the outermost color and tweak til it's as good as I can get it. They're getting smarter about how they design their display images giving them shadows and overlapping the designs which makes it difficult, but not impossible, to get a reasonable trace. This doesn't give an exact duplicate of course, but fine for me. I think they charge wayyy to much for those dies. Worse than cricut cartridges... at least you can size the cricut images to your needs. But they are quite beautiful...

I'm thinking of making a chipboard cutout smaller than the paper cutfile and running through a die machine with a rubber mat to get a similar effect that the SB dies have. Just a thought.

Sharon in Iowa

--- In MTC_Tuts@..., "Goldie Holzer" wrote:
>
> I don't think this is off topic. Yell at me if I'm wrong. I know Flower
> Soft has 'kits' that match the spellbinders dies, was hoping something
> similar available for the cutters.
>
> Is there anyone in the electronic die cutting community that has cut files
> to match the spellbinders dies? I have about 30 of the spellbinders die
> sets that I have PURCHASED - so I'm not asking to get around them. I love
> them. But it would be so much easier to use our cutters if there were
> something available either free or for purchase on the net to at least match
> the more standard ones - like the LABELS ones. I have most of the standard
> ones, and all the fancy ones - the flowers, the rolled flower ones, ornate -
> I LOVE FANCY, lol!
>


Re: About spellbinders....

sbergstc <sbergstc@...>
 

Goldie,

I've lots of them from images found on the internet and at various online stores; I try to find the biggest files as they will trace best. I use the single color option and pick the outermost color and tweak til it's as good as I can get it. They're getting smarter about how they design their display images giving them shadows and overlapping the designs which makes it difficult, but not impossible, to get a reasonable trace. This doesn't give an exact duplicate of course, but fine for me. I think they charge wayyy to much for those dies. Worse than cricut cartridges... at least you can size the cricut images to your needs. But they are quite beautiful...

I'm thinking of making a chipboard cutout smaller than the paper cutfile and running through a die machine with a rubber mat to get a similar effect that the SB dies have. Just a thought.

Sharon in Iowa

--- In MTC_Tuts@..., "Goldie Holzer" wrote:

I don't think this is off topic. Yell at me if I'm wrong. I know Flower
Soft has 'kits' that match the spellbinders dies, was hoping something
similar available for the cutters.

Is there anyone in the electronic die cutting community that has cut files
to match the spellbinders dies? I have about 30 of the spellbinders die
sets that I have PURCHASED - so I'm not asking to get around them. I love
them. But it would be so much easier to use our cutters if there were
something available either free or for purchase on the net to at least match
the more standard ones - like the LABELS ones. I have most of the standard
ones, and all the fancy ones - the flowers, the rolled flower ones, ornate -
I LOVE FANCY, lol!


Webinar in Progress

Julie Flanagan
 

Don't miss this one!!!! Learn about the new features of Make The Cut 4.4.0, the latest stable release.

1. Please join my Webinar.
https://www1.gotowebinar.com/register/557983392

2. You will be connected to audio using your computer's microphone and speakers (VoIP). A headset is recommended.

Or, you may select "Use Telephone" after joining the Webinar.

Dial +1 (415) 655-0053
Access Code: 824-533-926
Audio PIN: Shown after joining the webinar

Webinar ID: 557-983-392

GoToWebinar®
Webinars Made Easy®


Re: Hundreds of Free Cutting Files

Goldie Holzer
 

Good idea!  $1 from each doesn’t sound like much, but it adds up quickly.

 

From: MTC_Tuts@... [mailto:MTC_Tuts@...] On Behalf Of BEN BARTLETT
Sent: Tuesday, February 12, 2013 5:15 PM
To: mtc_tuts@...
Subject: RE: [MTC_Tuts] Hundreds of Free Cutting Files

 

 


this sounds like an awesome time for all of us to rally together and donate even a 1.00 to her and her husband:)  It's easy as 1,2,3. :) be blessed

~Beyond Measure

Tamm

 

PS---Thanks so much for sharing:)


To: MTC_Tuts@...
From: mariah10@...
Date: Tue, 12 Feb 2013 16:25:01 -0600
Subject: RE: [MTC_Tuts] Hundreds of Free Cutting Files

 

 

I had a bunch of her stuff, but I just spent – well, I’m embarrassed to say how long – so let’s just say TOO LONG!  Downloading her stuff and watching the videos on her site.  Thanks for the heads up!  Now, ….to get off my duff and DO some of those things instead of ‘collecting’!

 

From: MTC_Tuts@... [mailto:MTC_Tuts@...] On Behalf Of CraftyMusician
Sent: Monday, February 11, 2013 6:26 PM
To: MTC_Tuts@...
Subject: [MTC_Tuts] Hundreds of Free Cutting Files

 

 

Victoria Kee has been freely sharing her cutting files for a number of years. She has posted her files in WPC and PDF and JPG formats, and has included many video tutorials as well. She posted this week that her husband's job may be ending soon, which means she may have to start charging for her cutting files. NOW is the time to check out her site to see what you would like to get while it is still FREE. Plan to spend some time there to get them all, as there are LOTS of nice files to download. Right click on the download button, select Save Target As or Save Link as, and save it to your computer. I have a folder devoted to her files. It helps to find the file you are looking for if you save them to folders that match her categories inside of her folder.

If you find that you like her work and would like to encourage her, you can use the Donate button.

This week she has posted a video showing how she has used some of her file creations to create an all-occasion cardmaking set. All files are included to create lots of lovely cards.

Go here and scroll down to the bottom of this page to find links to the categories. Each category is filled with cutting files. The MTC files import into Make The Cut.
http://izzaboutchu.yolasite.com/

Vicki has a free Yahoo group where she posts her newsletter with links to the new files she has posted at her site. Sign up for that group if you would like to get the notifications of new files added.
http://groups.yahoo.com/group/IzzaBoutChu/

Julie, craftymusician@... Flanagan Educational Services
Purchase MTC: tinyurl.com/JF-MTC2
Purchase Pazzles: http://tinyurl.com/Pazzles-JF
http://groups.yahoo.com/group/MTC_Tuts/

 


Re: Hundreds of Free Cutting Files

BEN BARTLETT
 


this sounds like an awesome time for all of us to rally together and donate even a 1.00 to her and her husband:)  It's easy as 1,2,3. :) be blessed
~Beyond Measure
Tamm
www.urbeyondmeasure.com

PS---Thanks so much for sharing:)

To: MTC_Tuts@...
From: mariah10@...
Date: Tue, 12 Feb 2013 16:25:01 -0600
Subject: RE: [MTC_Tuts] Hundreds of Free Cutting Files

 

I had a bunch of her stuff, but I just spent – well, I’m embarrassed to say how long – so let’s just say TOO LONG!  Downloading her stuff and watching the videos on her site.  Thanks for the heads up!  Now, ….to get off my duff and DO some of those things instead of ‘collecting’!

 

From: MTC_Tuts@... [mailto:MTC_Tuts@...] On Behalf Of CraftyMusician
Sent: Monday, February 11, 2013 6:26 PM
To: MTC_Tuts@...
Subject: [MTC_Tuts] Hundreds of Free Cutting Files

 

 

Victoria Kee has been freely sharing her cutting files for a number of years. She has posted her files in WPC and PDF and JPG formats, and has included many video tutorials as well. She posted this week that her husband's job may be ending soon, which means she may have to start charging for her cutting files. NOW is the time to check out her site to see what you would like to get while it is still FREE. Plan to spend some time there to get them all, as there are LOTS of nice files to download. Right click on the download button, select Save Target As or Save Link as, and save it to your computer. I have a folder devoted to her files. It helps to find the file you are looking for if you save them to folders that match her categories inside of her folder.

If you find that you like her work and would like to encourage her, you can use the Donate button.

This week she has posted a video showing how she has used some of her file creations to create an all-occasion cardmaking set. All files are included to create lots of lovely cards.

Go here and scroll down to the bottom of this page to find links to the categories. Each category is filled with cutting files. The MTC files import into Make The Cut.
http://izzaboutchu.yolasite.com/

Vicki has a free Yahoo group where she posts her newsletter with links to the new files she has posted at her site. Sign up for that group if you would like to get the notifications of new files added.
http://groups.yahoo.com/group/IzzaBoutChu/

Julie, craftymusician@... Flanagan Educational Services
Purchase MTC: tinyurl.com/JF-MTC2
Purchase Pazzles: http://tinyurl.com/Pazzles-JF
http://groups.yahoo.com/group/MTC_Tuts/



Free Valentine Heart Overlay Frame Cutting File

Lisa-Quilling Patch
 


Re: Hundreds of Free Cutting Files

Goldie Holzer
 

I had a bunch of her stuff, but I just spent – well, I’m embarrassed to say how long – so let’s just say TOO LONG!  Downloading her stuff and watching the videos on her site.  Thanks for the heads up!  Now, ….to get off my duff and DO some of those things instead of ‘collecting’!

 

From: MTC_Tuts@... [mailto:MTC_Tuts@...] On Behalf Of CraftyMusician
Sent: Monday, February 11, 2013 6:26 PM
To: MTC_Tuts@...
Subject: [MTC_Tuts] Hundreds of Free Cutting Files

 

 

Victoria Kee has been freely sharing her cutting files for a number of years. She has posted her files in WPC and PDF and JPG formats, and has included many video tutorials as well. She posted this week that her husband's job may be ending soon, which means she may have to start charging for her cutting files. NOW is the time to check out her site to see what you would like to get while it is still FREE. Plan to spend some time there to get them all, as there are LOTS of nice files to download. Right click on the download button, select Save Target As or Save Link as, and save it to your computer. I have a folder devoted to her files. It helps to find the file you are looking for if you save them to folders that match her categories inside of her folder.

If you find that you like her work and would like to encourage her, you can use the Donate button.

This week she has posted a video showing how she has used some of her file creations to create an all-occasion cardmaking set. All files are included to create lots of lovely cards.

Go here and scroll down to the bottom of this page to find links to the categories. Each category is filled with cutting files. The MTC files import into Make The Cut.
http://izzaboutchu.yolasite.com/

Vicki has a free Yahoo group where she posts her newsletter with links to the new files she has posted at her site. Sign up for that group if you would like to get the notifications of new files added.
http://groups.yahoo.com/group/IzzaBoutChu/

Julie, craftymusician@... Flanagan Educational Services
Purchase MTC: tinyurl.com/JF-MTC2
Purchase Pazzles: http://tinyurl.com/Pazzles-JF
http://groups.yahoo.com/group/MTC_Tuts/


New file uploaded to MTC_Tuts

MTC_Tuts@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the MTC_Tuts
group.

File : /03_Intermediate_Lessons/III.11a_FunWithSwirls.pdf
Uploaded by : juliefes <craftymusician@...>
Description : Update on Tutorial III.11 to take advantage of the new Swirl tool in MTC 4.4.0 on Feb 12, 2013. Sections III through the end of this document remain the same as tutorial III.11.

You can access this file at the URL:
http://groups.yahoo.com/group/MTC_Tuts/files/03_Intermediate_Lessons/III.11a_FunWithSwirls.pdf

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
Regards,

juliefes <craftymusician@...>

10921 - 10940 of 31960