Date   

Re: Cricut Cake machine with 4 cartridges for $ 80.00

Liz Ackerman
 

Not true. Julie has updated the firmware of her Cricut to 2.45 and it works fine with MTC.

Liz
Edmonton AB
Canuckland

Sent: Saturday, November 26, 2011 11:47 AM
Subject: Re: [MTC_Tuts] Re: Cricut Cake machine with 4 cartridges for $ 80.00

 

got my cricute cake today ,its version 2.31 will that work with MTC don’t want to upgrade and then it not work , does anyone know?
Ann W


Re: Cricut Cake machine with 4 cartridges for $ 80.00

Ann Weedman <weedmana@...>
 

got my cricute cake today ,its version 2.31 will that work with MTC don’t want to upgrade and then it not work , does anyone know?
Ann W
 

Sent: Sunday, November 20, 2011 8:46 AM
Subject: Re: [MTC_Tuts] Re: Cricut Cake machine with 4 cartridges for $ 80.00
 
You can use your deep blade holder. The regular blades will fit in the holder, but you will need to adjust the blade extension further, because the regular Cricut blades are shorter than the deep cut blades.

Julie, craftymusician@...  Flanagan Educational Services
http://groups.yahoo.com/group/MTC_Tuts/
Purchase MTC:    http://tinyurl.com/JF-MTC2 
http://tinyurl.com/SCAL-Purchase



From: "Ann Weedman"
To: "MTC Tuts"
Sent: Sunday, November 20, 2011 5:26:03 AM
Subject: Re: [MTC_Tuts] Re: Cricut Cake machine with 4 cartridges for $ 80.00

 
that’s great , mine is finally shipped hope to get it next week but with thanksgiving thrusday I don’t know. I will have to get another blade holder or use my deep blade holder do you know if the regular blades work in it?
Ann W
 
From: Amethyst
Sent: Saturday, November 19, 2011 7:47 PM
Subject: Re: [MTC_Tuts] Re: Cricut Cake machine with 4 cartridges for $ 80.00
 
Yep, got it and I quickly got my mat and blade out of my old expression, opened up mtc and cut my file without a problem. I just ordered another one yesterday for my daughter. The only thing to be careful of as a few have already mentioned is to make sure that cricut craft room is not open if your cutting something from mtc. You will get an error message and won't be able to cut until you close out ccr.
 
From: Ann Weedman
To: MTC_Tuts@...
Sent: Saturday, November 19, 2011 10:54 AM
Subject: Re: [MTC_Tuts] Re: Cricut Cake machine with 4 cartridges for $ 80.00

 
wow, you got yours already? they havent shipped mine yet
Ann W
 
From: Amethyst
Sent: Friday, November 18, 2011 8:16 PM
Subject: Re: [MTC_Tuts] Re: Cricut Cake machine with 4 cartridges for $ 80.00
 
 
I got my cricut cake and yes it works great with mtc.
 
From: Ann Weedman
To: MTC_Tuts@...
Sent: Tuesday, November 15, 2011 7:28 PM
Subject: Re: [MTC_Tuts] Re: Cricut Cake machine with 4 cartridges for $ 80.00

 
I bought the 49.00 to sure hope it works with mtc cause don’t need it for baking.
Ann W
 
From: A Wall
Sent: Tuesday, November 15, 2011 6:36 PM
Subject: Re: [MTC_Tuts] Re: Cricut Cake machine with 4 cartridges for $ 80.00
 
 
Thanks Pat for that link. I am one of the girls who also bought that awesome deal of $49 so I will check into this site.

a





Rounding Corners

Cindy <csmercurio@...>
 

My apologies for asking this again - but I didn't get any responses.

Anyone?

Hello... Is there anyway to round corners of a file using MTC? Sometimes certain fonts have corners that aren't friendly to my Gazelle. I believe I saw something, somewhere, but... now I can't seem to find it. Thanks so much :)


Re: Paulo's website

Kathy McIlrath <kmcilrath@...>
 

From: Zora
Sent: Friday, November 25, 2011 3:52 PM
Subject: [MTC_Tuts] Paulo's website
 
 

 
What is the web site address for Paulo?  Would appreciate it very much. 
Zora


Re: Paulo's website

Paula Davis <pjandavis@...>
 

Here you go!

http://scale-files.blogspot.com/
 
Paula
http://lowcountrypaisley.blogspot.com/


From: Zora
To: MTC_Tuts@...
Sent: Friday, November 25, 2011 3:52 PM
Subject: [MTC_Tuts] Paulo's website

 
 
What is the web site address for Paulo?  Would appreciate it very much. 
Zora



Paulo's website

Zora <znicodemus@...>
 

 
What is the web site address for Paulo?  Would appreciate it very much. 
Zora


Help

Terri Ettling-Shell
 

I need some help.  I am hoping someone can point me to the correct tut.  I want to put vinyl on clear glass ornaments.  I want to put Merry Christmas in a circle around the top.  Hope that makes sense.  I am thinking I should be using the warp something but cant remember what it is called.  Can someone send me to the right tut?  Thanks

 

Terri Ettling-Shell

 


Re: Fw: MAKE YOUR OWN LANTERN CHALLENGE

Eileen Leber
 

Sorry....the only one I saved was the one I sent you......make the blocks wider  or break and reweld it...eileen

From: Gail
To: MTC_Tuts@...
Sent: Wednesday, November 23, 2011 9:36 PM
Subject: Re: [MTC_Tuts] Fw: MAKE YOUR OWN LANTERN CHALLENGE

 
Both files that you included in your e-mail are of the same thing.  I like the 2nd one you did and did not think that file was included.
Gail
 
Sent: Wednesday, November 23, 2011 1:08 AM
Subject: Re: [MTC_Tuts] Fw: MAKE YOUR OWN LANTERN CHALLENGE
 
 
the same as what....what they have on commercial....no but you can use this file and weld whatever picture you want into the open square hole....eileen
 
From: Gail
To: MTC_Tuts@...
Sent: Tuesday, November 22, 2011 10:07 PM
Subject: Re: [MTC_Tuts] Fw: MAKE YOUR OWN LANTERN CHALLENGE

 
Eileen,
Are these files the same thing?
Gail
 
Sent: Monday, November 14, 2011 8:09 AM
Subject: [MTC_Tuts] Fw: MAKE YOUR OWN LANTERN CHALLENGE [4 Attachments]
 
 

 
----- Forwarded Message -----
From: Eileen Leber
To: "cricut_friends@..."
Sent: Monday, November 14, 2011 1:33 AM
Subject: Re: [cricut_friends] Has anyone made a paper lantern project found on cricut.com? MAKE YOUR OWN LANTERN CHALLENGE

I tried this lantern.....made the pattern myself....using squares..circles...rectangles....you can make the roof taller or shorter by stretching the triangles longer or shorter.....and the cut out can be any shape you want to make...experiment and lets see what you can make in your own  "MAKE YOUR OWN LANTERN CHALLENGE"   eileen
 
I was rushing when I made these should have folded better.....
 
From: Diane
To: cricut_friends@...
Sent: Sunday, November 13, 2011 7:56 PM
Subject: Re: [cricut_friends] Has anyone made a paper lantern project found on cricut.com?

 
yes, before you do, you shoul



Re: 3d Christmas Village Houses?

mainelytwigs
 

thanks, Denise, think I have seen them and loved them. makes me think-I have winter woodlands and there are 3d houses on that!
 
Blessings, Norma

From: Denise Hoffman
To: MTC_Tuts@...
Sent: Thursday, November 24, 2011 8:04 AM
Subject: RE: [MTC_Tuts] 3d Christmas Village Houses?

 
http://dscrapbookingroom.blogspot.com/2009/10/cut-these-lovely-houses-on-your.html
 
Check out this old post of mine. 
 
Denise
 
From: MTC_Tuts@... [mailto:MTC_Tuts@...] On Behalf Of Zora
Sent: Tuesday, November 22, 2011 6:38 PM
To: MTC_Tuts@...
Subject: Re: [MTC_Tuts] 3d Christmas Village Houses?
 
 
go here she has templates       http://melstampz.blogspot.com/search/label/*TEMPLATEs
love her site and I am on her email list.
Zora
 
Sent: Tuesday, November 22, 2011 3:42 PM
Subject: Re: [MTC_Tuts] 3d Christmas Village Houses?
 
 
Wow, I like those!
 
Megin
 
On Sun, Nov 20, 2011 at 9:45 PM, writescopy@... <writescopy@...> wrote:
 
Just got a holiday catalog from "Red Envelope" and they're selling a set of Christmas Village houses/luminaries that I'd love to create on my own. I have some 3d box files I was thinking of tinkering with, but was wondering if anyone has anything a little closer to the finished product already. Here's a link to what I'm aiming for:

http://gifts.redenvelope.com/gifts/village-luminari--set-of-5-houses-30056495?REF=REDSRCHgoogkwd_RedEnvelope.com._e_BRAND&PRID=SRCHribbon10&tile=hmpg_hero1&viewpos=14&trackingpgroup=rcfav

Thanks!

~Jennifer



--
Megin, K5IJ
“The indispensable first step to getting the things you want out of life is this: decide what you want.” -- Ben Stein
 
 


__________ Information from ESET NOD32 Antivirus, version of virus signature database 6652 (20111122) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




Re: 3d Christmas Village Houses?

mainelytwigs
 

thanks for the link.
 
Blessings, Norma

From: Leslie Lockstampfor
To: writescopy@...; MTC_Tuts@...
Sent: Thursday, November 24, 2011 3:11 PM
Subject: [MTC_Tuts] Re: 3d Christmas Village Houses?

 
SVGcuts has a great cottage that I am sure you could adapt...

tealight house

Another variation

Gingerbread house

Tealight cottages

Enjoy!



Re: Something's not right...

Julie Flanagan
 

I received a notice from Yahoo that they are changing systems due to spamming issues. The system change has slowed down message delivery in the past week, but the messages should start coming through now. Thanks for your patience!

Julie, craftymusician@...  Flanagan Educational Services
http://groups.yahoo.com/group/MTC_Tuts/
Purchase MTC:    http://tinyurl.com/JF-MTC2  
http://tinyurl.com/SCAL-Purchase



From: "S. Bryan Williams"
To: "MTC Tuts"
Cc: writescopy@...
Sent: Tuesday, November 22, 2011 1:29:37 PM
Subject: Re: [MTC_Tuts] Something's not right...

 

That is probably due to me slacking on the job (as a moderator).  Messages have been queued up, but I just now got around to getting to them.  Sorry...

Bryan


On 11/22/2011 10:52 AM, writescopy@... wrote:

 

The last post I'm able to view from ANYONE is from 11/20. Daily digest doesn't seem to be working. I know I've had some computer issues lately, so I'm wondering if I need to change a preference or setting somewhere so that I can keep getting group updates and whatnot. Help!

~Jennifer


Re: 3d Christmas Village Houses?

Leslie Lockstampfor
 

SVGcuts has a great cottage that I am sure you could adapt...

tealight house

Another variation

Gingerbread house

Tealight cottages

Enjoy!


Re: 3d Christmas Village Houses?

Denise Hoffman
 

From: MTC_Tuts@... [mailto:MTC_Tuts@...] On Behalf Of Zora
Sent: Tuesday, November 22, 2011 6:38 PM
To: MTC_Tuts@...
Subject: Re: [MTC_Tuts] 3d Christmas Village Houses?

 

 

go here she has templates       http://melstampz.blogspot.com/search/label/*TEMPLATEs

love her site and I am on her email list.

Zora

 

Sent: Tuesday, November 22, 2011 3:42 PM

Subject: Re: [MTC_Tuts] 3d Christmas Village Houses?

 

 

Wow, I like those!

 

Megin

 

On Sun, Nov 20, 2011 at 9:45 PM, writescopy@... <writescopy@...> wrote:

 

Just got a holiday catalog from "Red Envelope" and they're selling a set of Christmas Village houses/luminaries that I'd love to create on my own. I have some 3d box files I was thinking of tinkering with, but was wondering if anyone has anything a little closer to the finished product already. Here's a link to what I'm aiming for:

http://gifts.redenvelope.com/gifts/village-luminari--set-of-5-houses-30056495?REF=REDSRCHgoogkwd_RedEnvelope.com._e_BRAND&PRID=SRCHribbon10&tile=hmpg_hero1&viewpos=14&trackingpgroup=rcfav

Thanks!

~Jennifer




--

Megin, K5IJ

“The indispensable first step to getting the things you want out of life is this: decide what you want.” -- Ben Stein
 

 



__________ Information from ESET NOD32 Antivirus, version of virus signature database 6652 (20111122) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


Re: Fw: MAKE YOUR OWN LANTERN CHALLENGE

Gail <jobiegg@...>
 

Both files that you included in your e-mail are of the same thing.  I like the 2nd one you did and did not think that file was included.
Gail
 

Sent: Wednesday, November 23, 2011 1:08 AM
Subject: Re: [MTC_Tuts] Fw: MAKE YOUR OWN LANTERN CHALLENGE
 
 

the same as what....what they have on commercial....no but you can use this file and weld whatever picture you want into the open square hole....eileen
 
From: Gail
To: MTC_Tuts@...
Sent: Tuesday, November 22, 2011 10:07 PM
Subject: Re: [MTC_Tuts] Fw: MAKE YOUR OWN LANTERN CHALLENGE

 
Eileen,
Are these files the same thing?
Gail
 
Sent: Monday, November 14, 2011 8:09 AM
Subject: [MTC_Tuts] Fw: MAKE YOUR OWN LANTERN CHALLENGE [4 Attachments]
 
 

 
----- Forwarded Message -----
From: Eileen Leber To: "cricut_friends@..."
Sent: Monday, November 14, 2011 1:33 AM
Subject: Re: [cricut_friends] Has anyone made a paper lantern project found on cricut.com? MAKE YOUR OWN LANTERN CHALLENGE

I tried this lantern.....made the pattern myself....using squares..circles...rectangles....you can make the roof taller or shorter by stretching the triangles longer or shorter.....and the cut out can be any shape you want to make...experiment and lets see what you can make in your own  "MAKE YOUR OWN LANTERN CHALLENGE"   eileen
 
I was rushing when I made these should have folded better.....
 
From: Diane
To: cricut_friends@...
Sent: Sunday, November 13, 2011 7:56 PM
Subject: Re: [cricut_friends] Has anyone made a paper lantern project found on cricut.com?

 
yes, before you do, you shoul


Re: cricut cake machine question?

JoAnn <bobscarfarm@...>
 

cricutmachine.com Has the cricut cake machine for $49.95 with 2 cartridge.

--- In MTC_Tuts@yahoogroups.com, "flugie03@..." <flugie03@...> wrote:

So if i understand this right all you need to do is switch out the blade housing and use the deep cut on for cutting paper and vinyl on the cricut cake??? for the price i may just have to buy a back up. but then they the expressions with no cartridge for 119.00...
thanks
jeri


Re: 3d Christmas Village Houses?

Zora <znicodemus@...>
 

I know, just not enough time in the day. 
Zora
 

From: Julie
Sent: Wednesday, November 23, 2011 7:12 AM
Subject: [MTC_Tuts] Re: 3d Christmas Village Houses?
 
 

Oh, my! Zora, you have just opened a whole new world. So much to do and so little time...

Blessings,
Julie

--- In mailto:MTC_Tuts%40yahoogroups.com, "Zora" wrote:
>
> go here she has templates http://melstampz.blogspot.com/search/label/*TEMPLATEs
> love her site and I am on her email list.
> Zora
>



__________ Information from ESET NOD32 Antivirus, version of virus signature database 6654 (20111123) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


FW: Snowflake Napkin Rings Files uploaded

Susan Boyles
 

The file format choice is PDF, SVG and MTC 3.3.3.
Please let me know if they don't work.

Have a wonderful Holiday weekend.

 

Suzzi

http://whisperscreativity.blogspot.com/


  


Re: Vinyl for use with Heat Press

Klo Oxford
 

I love the stuff that Pazzles has...it washes well and isn't stiff
Klo

Join me at http://www.pazzlescraftroom.com  Free Sunday Night Classes 8pm CST and Tuesday at 1pm CST (go to Community, then Klo's Classroom)
http://www.scrappingklo.blogspot.com Free Files  



On Wed, Nov 23, 2011 at 4:06 PM, dtcqueen <dtcqueen@...> wrote:
Hello everyone!

Has anyone found a good place to purchase vinyl that you can cut out and then use the heat press to press it on to your clothing?




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
   http://groups.yahoo.com/group/MTC_Tuts/

<*> Your email settings:
   Individual Email | Traditional

<*> To change settings online go to:
   http://groups.yahoo.com/group/MTC_Tuts/join
   (Yahoo! ID required)

<*> To change settings via email:
   MTC_Tuts-digest@...
   MTC_Tuts-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
   MTC_Tuts-unsubscribe@...

<*> Your use of Yahoo! Groups is subject to:
   http://docs.yahoo.com/info/terms/



Vinyl for use with Heat Press

dtcqueen
 

Hello everyone!

Has anyone found a good place to purchase vinyl that you can cut out and then use the heat press to press it on to your clothing?


New Thanksgiving PIlgrim Paper Doll AND Contest!

Lisa-Quilling Patch
 

Hope you are all ready for Thanksgiving- or almost there
 
Here is a free Pilgrim paper doll cutting file
 
 
And- I am running a contest this week where you can win your favorite Christmas/Holiday paper Pack-
for details see below.
 
Happy Thanksgiving everyone!
 
 
 
 
 

18821 - 18840 of 31922